Chevrolet 2007 Silverado 1500 Pickup, Руководство пользователя

Страница: 219 / 670

Increasing Speed While Using Cruise
Control
There are two ways to go to a higher speed:
•
Use the accelerator pedal to get to the higher
speed. Press the set button, then release the
set button and the accelerator pedal. You
will now cruise at the higher speed. If
the accelerator pedal is held longer than
60 seconds, cruise control will turn off.
•
Move the cruise switch from on to resume/
accelerate. Hold it there until you get up to the
speed you want, and then release the it. To
increase your speed in very small amounts,
move the switch briefly to resume/accelerate.
Each time you do this, your vehicle will go
about 1 mph (1.6 km/h) faster.
Reducing Speed While Using Cruise
Control
•
Press in the set button until you reach the
desired lower speed, then release it.
•
To slow down in very small amounts, briefly
press the set button. Each time you do this,
you will go about 1 mph (1.6 km/h) slower.
Passing Another Vehicle While Using
Cruise Control
Use the accelerator pedal to increase your speed.
When you take your foot off the pedal, your
vehicle will slow down to the cruise control speed
you set earlier.
Using Cruise Control on Hills
How well your cruise control will work on hills
depends upon your speed, load and the steepness
of the hills. When going up steep hills, you may
want to step on the accelerator pedal to maintain
your speed. When going downhill, you may
have to brake or shift to a lower gear to keep your
speed down. Of course, applying the brake
takes you out of cruise control. Many drivers find
this to be too much trouble and do not use
cruise control on steep hills.
219