Chevrolet 2007 Avalanche, Руководство пользователя

Страница: 196 / 628

5. Stow both bows and the front and rear rails in
the storage bag. When all components of the
tonneau cover are secured in the bag
properly, zip the bag shut.
Reverse the procedure to reinstall the tonneau
cover using the following suggestions:
•
When reinstalling the front rail, start by holding
the back edge of the rail up and then twisting
the back edge down while pushing it into
place.
•
Both bows are the same size and therefore
interchangeable.
•
When placing the bows in the side rails, it is
easiest to place the spring-loaded bow end
in first.
•
When placing the
bows, locate the
small notches in the
side rails. These
notches receive the
tang on the bow ends
and help the bows
seat into place.
•
When reinstalling the tonneau cover, start at
the front, near the cab. Place the plastic lip
into the front rail, then the rear rail, and finish
with the side rails.
To clean the tonneau cover, use mild soap and
water. If necessary, use a soft bristle brush
to remove dirt trapped in the grain of the material.
196