2-98
RESET (Reset Button):
D You can reset the AVG ECON, FUEL USED or
AVG SPEED trip computer modes by pressing and
holding this button for three seconds while you are
in the mode you wish to reset. A chime will sound
to confirm that your requested change has been
made and all the segments of the display will briefly
light up.
To change the display to a metric or English reading,
press the RESET and MODE buttons at the same
time. Hold them down for three seconds, and the
display will change. A chime will be heard to
confirm the new selection.
D The reset button can be used to set the compass zone
variation. See “Compass Variance” in the Index.
D The reset button can also be used to manually
calibrate the compass. See “Manual Compass
Calibration” in the Index.
MODE (Mode Button):
D Press this button to cycle through three modes of
operation
--
Off, Compass/Temperature and Trip
Computer mode.
D In the Trip Computer mode, pressing the MODE
button cycles through the five displays. Press the
MODE button after the last Trip Computer display to
return the DIC to the OFF mode.
Off: No driver information is displayed in this mode
of operation.
Compass/Temperature Mode: One of eight compass
readings and the outside temperature are displayed.
If the temperature is below 38
_F (3_C), the word
“ICE” is displayed for two minutes.
Содержание 2001 Impala
