2-20
Air Shift Control
(Manual Transmissions Only)
The lever for the rear axle
shift control is either at the
lower right corner of the
instrument panel or on the
shift lever.
When the lever is moved to HI, the rear axle will be in
the high range. Switch it to LOW to get the low range.
The two
-
speed axle should be in LOW when you park
the vehicle.
You’ll need to engage the transmission, even moving the
vehicle a little, to be sure the axle is in the low range.
Then apply the parking brake, shift into NEUTRAL and
shut off the engine.
Also, always start the vehicle in motion with the
two
-
speed axle in the LOW position. When you upshift
the rear axle from LOW to HI, move the lever to the HI
position, disengage the clutch, pause, engage the clutch
and then press down on the accelerator. When you shift
the axle down from HI to LOW, you don’t have to
clutch. Just move the lever to LOW, release the
accelerator and then quickly press it down again.
Air Suspension (If Equipped)
Your vehicle may be equipped with the Hendrickson
HAS Series single
-
axle air suspension which is designed
for single
-
axle on
-
highway use. This feature is available
in the 19,000 lb. capacity and as a low profile option for
operations which require extra cubic capacity and a
reduced deck height.
With this air suspension system, the ride height is set
during vehicle assembly so that the vehicle has a
constant frame height. The system will then increase
or decrease air pressure in the air springs to maintain
this height.
Содержание 2000 C-Series
