Chetco Digital Instruments SeaSmart.Net Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 59

Chetco Digital Instruments SeaSmart.Net Скачать руководство пользователя страница 25

SeaSmart.Net Adapter Manual Version1.3

25

CONNECT MODE

– To enable Connect Mode, use the drop down menu and select DISABLED for

Mode. Connections to designated Host IP Address will be initiated and held upon device power up. Under
Host 1, enter the target IP Address, Port Number, and Protocol (TCP or UDP). The Local Host Port
Number does not need to be specified as it is randomly generated.

If using UDP Broadcasts, enter in the local network broadcast address (ends in 255). For example on the
Private IP Network of 192.168.0.0 the broadcast address would be 192.168.0.255. UDP packets will then be
sent to all devices on the local network. Each listening device must be set to ACCEPT on their own IP
address.

Connect Mode – UDP Broadcast – Data is sent to all
devices on the subnet using the specified port number.
Each receiving device must be set to listen on its on
interface IP address. Allows multiple devices to receive
the same SeaSmart.net transmissions

Connect Mode – Web Server Post – Setting the
protocol to TCP and Port number to 80 will enable
SeaSmart.net to POST data directly to a local Web
Server running ASP. The live data can then be logged
and viewed with any Browser.

«
...
23
24
25
26
27
...
»

Содержание SeaSmart.Net




























































Отзывы:

Нет отзывов