CHESTER Cobra Mill, Инструкция по эксплуатации

Страница: 27 / 29

Figure 23. End Surface Milling
8. Safety
Safety practices of a machine shop should be
followed. A complete understanding of the
Safety
Rules would enable the students to identify potential
hazards that may occur under different working
conditions such that appropriate preventive actions
can be taken to avoid the happening of accidents.
Emphasis should be given that the eyes of the
machine operator must be protected by wearing a
face shield (figure 24) to prevent accident that may
be caused by chips, cutting fluid, and tool breakage.
Machine operators must also take care of their body
such as fingers which keep out of any moving parts,
especially the rotating cutter of the machine, to
prevent any unnecessary accident hurt. The milling
machine must be stopped immediately when any
accidence occurred, so the operator must stand
near by the control panel of the machine and pays
more attention on the operation. Remember the
Chinese phrase 'carefully can be driven the boat in
thousand year' that you will enjoy the benefits
provided by milling.
Figure 24. Face Shield