CHESTER Centurion 500, Руководство по эксплуатации

Страница: 4 / 46

Health & Safety
As with all machinery there are certain hazards involved with the operation and use of the lathe. Using the
machine with respect and caution will considerably lessen the possibility of person injury. However, if normal
safety precautions are overlooked or ignored, personal injury to the operator may result.
This machine was designed for certain applications only. We strongly recommend that the machine is not modified,
and / or used for any application other than which it was designed.
If you have any questions relative to its
application do not use the machine, until you have first been in contact with Chester UK.
The lathe may not arrive with a power socket or plug. In the event of this happening, please inform Chester UK on
Tel: (01244) 531 631.
Safety rules for all tools
User
1. Wear correct apparel
No loose clothing, gloves, rings, bracelets or other jewellery to get caught in moving parts. Non-slip
footwear is recommended. Wear protective hair covering to contain long hair.
2. Always wear eye protection
Refer to ANSLZ87.1 standard for appropriate recommendations. Also use face and / or a dust mask if the
cutting operation is dusty.
3. Don’t overreach
Keep a proper footing and balance at all times.
4. Never stand on a tool
Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted.
5. Never leave the tool running unattended
Turn power off.
Leave tool until it comes to a complete stop.
6. Drugs, alcohol and medication
Do not operate the tool while under the influence of drugs, alcohol or any medication.
7. Make sure the tool is disconnected from the power supply
While motor is being mounted, connected or reconnected.
8. Always
Keep hands and fingers away from any moving parts.
9. Stop
The machine before moving chips.
10. Shut-off
Power and clean the lathe and work area before leaving the machine.
Use of the machine
1. Remove adjusting keys and wrenches
Form a habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it
‘on’.
2. Don’t force the tool
It will do the job better and be safer at the rate for which it was designed.
3. Use the right tool
Don’t force the tool or attachment to do a job for which it was not designed.
4. Secure work
Use clamps or a vice to hold work when practical. It’s safer than using your hands, and frees both to operate
the machine.
5. Maintain tools in top condition
Keep tools sharp and clean for the best and safest performance. Follow instructions for lubricating and
changing accessories.
6. Use recommended accessories
Consult Chester UK for recommended accessories. The use of improper accessories may cause hazards.