CHESTER Centurion 500, Руководство по эксплуатации

Страница: 10 / 46

Operation
Principal Components Diagram
1. Lead Screw Clutch Handle 2. Change Lever 3. Shift Switch
4. Emergency Switch 5. Start Switch 6. Pilot
7. Locking Lever 8. Belt Tension Lever 9. Drilling-Milling Shift Switch
10. Micro Feed Clutch Lever 11. Micro Feed Handle 12. Spindle Locking Lever
13. Spindle Feed Lever 14. Tailstock Barrel Lock 15. Tailstock Handwheel
16. Rest Screw 17. Tailstock Locking Lever 18. Longitudinal Feed Handle
19. Toolpost Feed Handwheel 20. Slide Lock Lever 21. Threading Dial
22. Longitudinal Cross-Feed
Clutch Handle
23. Longitudinal Feed Handwheel 24. Cross Feed Handwheel
25. Saddle Lock Lever 26. Half Nut Lever
Main Spindle Driving
Before starting the machine, a check on the tension of the belt should be made. The belt should be depress
about 10mm under normal finger pressure. The tension of the belts can be adjusted by lever 8.
The main spindle running; stop, forward and reverse function can be realized by the shift switch 3. If you need to
change the direction of rotation, turn the shift switch to the middle position, wait a moment, then switch to the
required direction.