Chery QQ3, Руководство пользователя

Страница: 163 / 184

Service and Maintenance
154
Inordinate wear is usually caused by the
following causes including tire pressure
in nonconformity with the provisions, no
periodic tire alternation, incorrect wheel
alignment, tire unbalance, emergent
braking or bad driving habit.
Tread wear indicator
Termly inspect tread pattern depth in
order to assist you in judging when to
replace the tire. There is bu ilt-in tire tread
wear indicator on the tire. When the tire
tread is 1.6 mm thick or less thicker, the
indicator will occur between the tread
patterns, and the position of the wear
indicator is displayed by longitudinal
indicator on the tire. Due to security
consideration, replace the tire if its tread
abrasion depth is 2~3 mm. Replace tires
in coup le, Select the correct fixing
sequence. Guarantee identical tire sizes,
identical type and identical technology of
the two tires on the same axle shaft and
the identical tread p atterns.
！
Notice
Tire mixed using or inferior brand using
can make vehicle out of control and the
using of various sizes will harm
automobiles. Guarantee the same sizes
and type of the entire wheel. Use
specified tire by original factory. It is
extremely risky to use wear tire, junk tire
or damaged tire, even going to the length
of an accident If the following
circumstances occur, including tire tread
abrasion indicator exposure or tire
damage, please replace the tire. The used
tire is harmful to health and environments
and should not be disposed as house
garbage. It should be cleaned up with
locally specified security cleaning
mechanism
The wicked road
environments such as water , snow , ice
and grit will reduce towing force ,make
vehicle out of control, so under such
circumstances, driving should be slow.
Tire alternation
The service conditions of front and rear
wheel are different, so the abrasion status
is different too. It depends mainly on
running road surface, driving habit and so
on. For the front wheels abrade more
rapidly than the back wheels, in order to
avoid tire wear irregularity and lengthen
tire life , replace the tires ,adjust tire air
pressure and inspect wheel nut tightness
every other 5000 Km is necessary