Chery A1 2008, Руководство по эксплуатации, Страница: 140 / 176

Service and Maintenance
Snow Antiskid Chain
The snow antiskid chain can be used with
the tires for summer and the ones for
winter, but it can only be used on driving
wheels (front wheels).
When using snow antiskid chain, driving
performance of a vehicle equipped with
antiskid control system may be abnormal.
This phenomenon will be removed when
the system is shut off.
In order to avoid the full diameter wheel
cap being damaged, remove it before
installing the antiskid chain.
After the antiskid chain is removed,
immediately reinstall the wheel cap.
Wheel Train Belt
Drive belt is one of the parts on the
vehicle that are under most inclement
stress status, so, quality of the belt must be
superior and reliable so as to meet
working demands.
When replacing the drive belt, only
selecting one belt of the same size can not
meet the requirements. For the sake of
safety, be sure to use the original belt of
our company. The original drive belts are
available at our authorized service
stations.
Note:
After being used for a period of time, the
drive belt will extend a little. When
amount of extension reaches a certain
degree, the belt will become too loose,
which will result in failure and damage the
vehicle. Therefore, check tightness of
generator belt once every 1,000km.
Checking Tightness of
Drive Belt
Turn off ignition switch and then take off
the key.
Use thumb to press middle part of the belt
1. When using snow antiskid
chain, the driving speed should not