CHERUBINI Wave Wire Скачать руководство пользователя страница 6

15

KEY TO SYMBOLS

Press the up or down button to raise 
the awning

Press the buttons as indicated in rapid sequence and hold the button 
down at the step marked by “HOLD”, to check the motor confirmation 
movement.

UP

DOWN

HOLD

Press the 
UP-button

Press the
DOWN-button

Press and hold 
down the button

Motor 
rotation to 
confirm

DOWN

DOWN

HOLD

UP

2 sec

2 sec

DOWN

UP

?

DOWN

UP

DOWN

UP

?

COMAND SEQUENCES EXAMPLE

Most of the command sequences have three or six distinct steps.
The buttons should be pressed quickly (<0.5 sec) as indicated in the sequence.
The time interval between each step should not be more than 1 second, otherwise the 
command sequence will be cancelled.
To receive confirmation that the sequence has been accepted by the motor, the button 
must be held down at the final step marked by HOLD.

DOWN

DOWN

HOLD

UP

2 sec

Command sequence example in 3 steps:

Attention! If the sequence requires a repetition of the same commands 

 

(Up+Up/Down+Down), an interposition of the Stop position could be necessary 
depending on the type of switch in use.

E

NG

L

IS

H

Содержание Wave Wire













Отзывы: