35
SETTING THE CLOSING POSITION
SETTING THE OPENING POSITION
EXAMPLE 2:
Setting first the closing position
If the rolling shutter is completely closed, you have first to drive it up by around
20 cm.
Hold the button A or C pressed and drive the rolling shutter to the closing position.
With lockdown hangers:
press buttons A or C until the motor stops automatically.
Without lock down hangers:
use the button A or C to drive the rolling shutter to the
necessary closing position.
To set the closing position, press buttons B (stop) and C (down) simultaneously for about
2 seconds, until the motor performs automatically a short “up” movement.
This move is the visual confirmation of the setting operation.
Tn: Already programmed remote control
Pressing now button A, drive completely up the rolling shutter to the opening position.
With physical stops:
press button A until the motor stops automatically.
Without physical stops:
use the button A or C to drive the rolling shutter to the necessary
opening position.
To set the opening position, press buttons A (up) and B (stop) simultaneously for about 2
seconds, until the motor automatically performs a short “down” movement.
This move is the visual confirmation of the setting operation.
Tn: Already programmed remote control
Tn (2 sec)
confirm
?
A
C
+
B
C
Tn
confirm
Tn (2 sec)
Tn
+
A
B
A
E
NG
L
IS
H
