SETTING THE FIRST REMOTE CONTROL
This operation can only be performed when the control unit is new, or
after a total delete of the memory.
T1: First remote control to be set
During this step, power up only one control unit at time!
T1
T1
T1 (2 sec)
SETTING THE ROTATION DIRECTION OF THE MOTOR
This operation is mandatory if the rotation direction of the motor does
not match to the UP and DOWN functions of the remote control as an
exemple when giving the ascent command the rolling shutter/awning
descends.
Setting the rotation direction using the button
RESET/AUX:
The rotation direction can be reversed also by interchanging the
BROWN
motor wire with the
BLACK
motor wire.
The control unit will keep this setting even after complete
memory clearing!!
SETTING OF ADDITIONAL REMOTE CONTROLS
Up to 15 remote controls can be set.
Tn: Already programmed remote control
Tx: Additional remote control
Tn
Tn
Tx (2 sec)
18
GB
max 2 sec
RESET/AUX
