CHERUBINI A510025, Инструкция по эксплуатации

Страница: 15 / 24

I
*For the complete description of the functions of this device see the instruction booklet that came in
the box.
It detects movements caused by the wind on the awning arms and also any accumulation of water or
snow on the fabric.
MISTRAL SENSOR (BLUE BUS TDS RX)
SETTING THE MISTRAL SENSOR
DELETING THE MISTRAL SENSOR
SELECTOR
LED
SET BUTTON
0
To associate the sensor to the control unit, a remote control must be already memorized. Set the selector
to the 0 position and then perform this sequence:
To delete the sensor from the control unit, an already programmed remote control must be used. Set
the selector to the 0 position; if active wait for the sensor to go off and then perform this sequence:
+ A B
B
2 sec
set
+
A
B
2 sec
A
set
37
MISTRAL*- Ref. A520012
ENGLISH