9
3 Magnetic card reader –
3-track version
The magnetic card reader reads all
DIN ISO 7811/-12, Gemini, AAMVA and JIS
compliant cards. It can read the tracks
individually, in pairs or all together. The
decoding of the data can take place either in
the keyboard (standard) or via the software as
desired.
3.1 Using the magnetic card
reader
1 Insert the magnetic card into the magnetic
card reader from the right with magnetic
strips pointing downwards towards the
keyboard.
2 Pull the magnetic card to the left through
the magnetic card reader.
An acoustic signal confirms the successful/
unsuccessful completion of the reading
process:
1 x beep = Reading process successful.
The data is transferred.
2 x beeps = Reading process unsuccessful.
The data is not transferred.
Configuration via
CHERRY Tools
: signal for
successful/unsuccessful reading process,
duration.
3.2 Definition of headers and
terminators
Headers and terminators mark the start and
the end of the magnetic card data
transmission. They can be defined using the
software
CHERRY Tools
. The header/
terminator code is inserted before/after the
actual magnetic card data.
4 Smartcard reader
The integrated smartcard reader is available
once you have installed the software driver.
It reads and inscribes all smartcards in
accordance with DIN ISO 7816.
• Install the smartcard reader driver for the
PC/SC interface using the hardware
assistant.
For additional CT-API support (MKT 1.0) and
homebanking:
• Run the
CHERRY
SmartDevice setup.
4.1 Using the smartcard reader
• Insert the smartcard into the smartcard slot
with the chip pointing downwards and
towards the keyboard.
Contact is established after a clear pressure
point is passed.
5 Touchpad
The touchpad replaces the mouse. You can
move the mouse cursor with your finger, and
select and drag objects.
5.1 Move the mouse cursor
• Move your finger across the touchpad.
5.2 Double-click
• Touch the touchpad twice in quick
succession.
Configuration via
CHERRY Tools
: touchpad on/
off, double click on/off.
6 Software installation
1 Insert your CD in the CD-ROM drive.
The CD-ROM starts automatically.
2 If the CD-ROM does not start automatically,
double click on the CD-ROM drive in
Windows-Explorer and then on the file
autostart.exe
.
3 Follow the installation instructions on the
screen.
Latest software version on the
internet
The software is subject to constant
development. The latest version is available
on the Internet under:
www.cherry-world.com
.
GB
