5
6
114 5
. mm
114 5
. mm
99
.0
mm
35
.0
mm
22 5
. mm
22 5
. mm
1
2
3
1
2
M3
8.0
User Manual
114.5mm×99.0mm×22.5mm
Dimensions
Connections
(1) This safety relay adopts wiring with removable terminal block;
he minimum flexible copper cross section area of input side wire should
be 0.5 mm , and minimum of output side wire should be 1 mm ;
A length of 8mm bare wire is locked by the M3 bolt;
Output contacts must provide enough fuse protection connection;
Copper wire must withstand minimum ambient temperature 75
Terminal screws may cause wrong operation, fever and so on, so please
tightening the torque according to the rules:
Terminal screws tightening torque: 0.5Nm.
2
2
℃
(2) T
(3)
(4)
(5)
;
(6)
Installation
The safety relay should be located in a control cabinet with better than IP54, at
the same time, should comply with related requirements in IEC 60204-1.
CZSR8000 series safety relay is designed for mounting on 35mm DIN guide rail.
Installation according to the following steps:
1)
Push the downside of the safety relay in the rail.
Make the upside of the safety relay locked into the guide rail;
(
(2)
Disassembly
( ).
(
≤
)
( ).
,
( ).
.
1 Insert a screwdriver its edge length 6mm into the downside metal lock of the
barrier;
2 Push the screwdriver upwards then prize the metal lock downwards;
3 Take the barrier out of the guide rail
Maintenance
(1)
Please comply with related safety requirements. Be sure to operate
according to our user manual, otherwise may cause fatal accidents or person
and property loss;
Every product has been tested strictly before leaving factory. If users find
any abnormality in the module, please contact the nearest agent or our
technical hot-line;
In 5 years from the delivery date, we will repair or replace it without
payment, if the product works improperly during normal operation.
Please check the safety function of safety relay periodically, make sure the
safety function execute properly, and there is no sign of any components or
circuit changed or bypass;
(2)
(3)
(4)
CZ.CZSR8201.11E(S)-4.0/16.03
