SK31101 Series
Backplane |
20
Figure 18 Backplane rear view
Table 8 Connector and pin header function description
Label
Description
Description
Drawing
A
SATA/SAS
For connecting to a mainboard, this 7-pin SATA/SAS connector
is applied. A proper cable selection is essential as well to make
sure good signal integrity which can be maintained for the whole
connection path from mainboard HDD devices.
B
Power
These two connectors are used to power four 3.5” hard disks,
connected to this backplane, and each can ensure that all drives
are supplied with stable power inputs. If the chassis fan is also
powered by fan header (JF01), this configuration is highly
recommended.
C
Signal
Indicator
The event LED with red/black wire is located on front bezel of
SK3
1101
series and can be configured through this pin header.
