Doc. No.: 994-0029 v. 2.0 · Issue date: 26-Aug-2021
Page 2 of 2
ChemoMetec A/S · Gydevang 43 · 3450 Allerod · Denmark · [email protected] · www.chemometec.com
We recommend to always keep the optical
window/windows in the sample tray clean. To do
so, place a clean swab from the NucleoCounter®
Cleaning Kit on the inner part of the window, then
move it outwards to clean. Repeat the motion for
the entire optical window (see Figure 2).
Figure 2. Demonstration of how to clean the optical
window using a Cleaning Kit swab.
Cleaning a Liquid Spill
Any liquid spilled on the instrument can contaminate elements of the optical system. As there is a risk of
damaging the optical system while attempting to clean it, please con
sult ChemoMetec’s Support Team at
before attempting any cleaning.
Decontamination
In case your NucleoCounter® instrument requires decontamination, please contact
ChemoMetec’s Support
Liability Disclaimer
This technical note is for RESEARCH PURPOSES ONLY.
It is not intended for food, drug, household, or
cosmetic use. Its use must be supervised by a
technically qualified individual experienced in handling
potentially hazardous chemicals. The above
information is correct to the best of our knowledge.
Users should make independent decisions regarding
completeness of the information based on all sources
available. ChemoMetec A/S shall not be held liable for
any damage resulting from handling or contact with
the above product.
Product Disclaimer
ChemoMetec A/S reserves the right to introduce
changes in the product to incorporate new
technology. This technical note is subject to change
without notice.
Copyright
Copyright © ChemoMetec A/S 2013. All rights
reserved. No part of this publication may be
reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise,
without the prior written consent of ChemoMetec A/S,
Gydevang 43, DK-3450 Allerod, Denmark.
