Chell Q-Daq, Инструкция по установке и эксплуатации

Страница: 10 / 21

Page 9
5 Q-Daq Configuration Webserver
5.1 Introduction.
The Q-Daq web Configuration provides the means of setting up and demonstrating the Q-Daq unit
from a standard PC with an Ethernet port and browser.
The webserver is divided by tabs into five areas of functionality, namely 'Setup’, 'Live Data',
‘Advanced’, ‘Timestamp’ and ‘Factory Tools’.
'Setup Parameters' provides the means to set Q-Daq’s main operating parameters such as data
streaming rates and Device addresses.
The unit's function may be checked and demonstrated using
'Live Data' to show the Q-Daq’s
calibrated output.
‘Advanced’ provides setup for the all other more advance parameters that may require setting on a
per application basis.
‘Timestamp’ provides some options for configuring the timestamping feature of the Q-Daq.
‘
Factory Tools’ provides some functionality to change the MAC address of the Ethernet hardware.
This tab is password protected and therefore not readily available to everyone and further detail is
beyond the scope of this document.