background image

7

8

Installatoin method

 

(based on your child’s weight)

This baby car seat has four mass group based on (GB27887-2011) 

and (ECE R44/04), Please choose the way to install the mass group 

corresponding to the children's immediate weight .

 

0+

I

II

III

P14

P16

P20

P10, P12

P10, P20

P10, P20

P20

P10, P11

Do not install this child 
restraint under the 
following conditions:

1.Vehicle seats with 2-point safety belts.
2.Vehicle seats facing sideward or rearward with respect 
to the running direction of the vehiche.
3.Vehicle seats unstatble during installation.

      Do not place the child 
restraint in this vehicle seat 
where an active forntal 
airbag is installed if your 
child is still in rear facing 
mode.

      Best seat to place 
child restraint.

      Do not place the child 
restraint in the vehicle seat 
with 2-piont safety belts.

13

New born to 18 months

9-18

9 months to 4 years old

15-25

3 to 6 years old

22-36

5 to 12 years old

The applicable car model must be equipped with the safety 
belt of the 3-point belt retainer required by GB14166 or 
ECE R16.

The suitable location for installation on the 

car is shown on the left:

Содержание BABY DAYTONA STAGES II




















Отзывы: