7
Mounting instructions
1
Figure
A5
Section
5B
1- Ø8 mm threaded insert
2- 2x50 rysb screw
3- Motor connection plate & wall mounting plate
4- Range
5- Ø 8 mm threaded insert
6- 2x50 rysb screw
2
3
4
5
6
Range mounting
Mounting steps;
1- Drill the required holes in accordance with the distances specified in Figure A4.
2- Drive 4xØ8 mm threaded inserts (1-5) and 2xØ7 threaded inserts into the wall.
3- Drive 2x50 rysb screws(2) into the threaded insert making sure that the spacing between the wall and
the screw head is 2-4 mm.
4- Lift the product, slide the screw head into the large hole on the motor connection plate & wall mounting
plate and slightly push the product against the wall and downwards, make sure that screw heads are
properly inserted into the hole.
5- Open the product cover and remove 2x50 rysb(6) screws as shown in Figure A5.
6- Check the steps you applied and continue with the flue assembly.
