Electric Induction hobs Chef’s EH-XXX533
16
6. Switching ON/OFF
6. 1 Switching On/Off the Touch control(TC)
After connecting to the mains, the TC unit takes 1 second to prepare for
operation. After a reset all 7 - segments displays flashes up for 1 second. After
1 second all 7 - segments displays are switched off again.
The TC unit may be switched ON by pressing the “ ON/OFF” key after 1sec
connected to mains. All 7 - segments display show “ 0”.
If a cooking zone is hot the display toggles between “ 0” and “H”.
Fig. 1: Turn on the TC by press on the ON/OFF key
Electronics remains activated for 20 seconds. If there is no cooking level or
timer selection done in this period, the electronics automatically resets to the Off-
mode by releasing a signal tone.
The touch control can be activated when only the “ ON/OFF” key is pressed.
In case of an active “Key Lock Function” when switching POWER ON, LED
19 lights on for LOCKED. Possible optic warnings for hot cooking zones [H] are
displayed on the DIGI Select- Sensors & Display.
By pressing the ON/OFF key of the control unit in ON-Mode, the Touch
Control may be switched off at any time. This is also applicable for locked control
units (active child lock). The ON/OFF key takes always priority with the POWER-
OFF function.