5
HOW TO USE YOUR FOOD PROCESSOR
Before using your new appliance, wash all removable parts as instructed in USER
MAINTENANCE section of this manual.
IMPORTANT: Handle chopping blade and slicing and shredding disc carefully.
They are very sharp.
ASSEMBLING THE FOOD PROCESSOR
1.
Attach center post to the motor housing. Place the work bowl on the base
with the handle facing the front of the food processor.
2.
Hold the handle and rotate the work bowl counter clockwise until it clicks
firmly into place.
3.
Place cover over work bowl, while holding feed chute rotate cover counter
clockwise until cover locks.
Note:
Be sure to lock the work bowl in place before attaching the chopping blade
or slicing and shredding disc and the cover.
Important: For you protection this appliance has an interlock system. The
processor will not operate unless the processing work bowl and cover are
properly locked in place.
HOW TO CHOP IN THE PROCESSING WORK BOWL
The chopping blade is used to coarsely or finely chop, mince, mix, puree foods to a
smooth consistency.
1. Lock the work bowl into position.
2. Hold chopping blade by center shaft and insert onto center post.
Caution: The chopping blade is very sharp. Use caution when handling and
storing.
3. Place food is work bowl.
4. Place cover on work bowl and lock into place by rotating counter clockwise.
5. Place the food pusher in place.
Important: Never use your fingers to direct food through the feed chute.
6. Select your desired speed.
Note:
Process foods for no more than a few seconds at a time. Pulsing produces
excellent results and offers greater control.
Important: Make sure the chopping blade has completely stopped spinning
before removing cover from processing bowl.
7. Turn the knob to the “0” position and allow the chopping blade to stop
revolving before removing cover. Twist cover to the unlock position (clockwise) to
remove.
