Troubleshooting
Maintenance
.
1. Unable to trigger a flash by pressing Test Button or the
1.
Avoid sudden drops.
The device may malfunction after
camera's shutter-release button.
strong shocks or impacts.
Make sure batteries are installed properly and the trigger set
2.
Keep dry.
The device is not water-proof. Malfunction, rust,
is powered on.
and corrosion may occur and the device may go beyond
Check if the transmitter and the receiver are set to the same
repair if immersed in water or expose to high humidity.
channel. If not, set to the same position.
3.
Keep away from strong magnetic field.
The strong static
Check if the trigger set is securely seated into the camera's
or magnetic field produced by devices such as ratio
hot shoe.
transmitters leads to malfunction.
2. Signal disturbance or shooting interference.
Change a different channel on the trigger set.
