Other Buttons
power ratio. “OF, 1/128~1/1” for Cheetah Light. “OF” means
the flash triggering function is shut down on the flash.
1. Set Button (
SET
)
5. Test Button (
TEST
)
Press the Set button and settings on the transmitter will be
communicated with the flash through the receiver. Will
Press Test Button to fire the flash. Both the indicators on the
blink for a second. on the LCD display.
transmitter and the receiver will blink.
Press and hold the Set button for 2 sec. to switch the power-
ratio display mode.
Using the Trigger Set
2. Buzz Switch (
BUZZ
)
Press the Buzz Switch to turn the buzzer on or off. When the
■
Wireless Adjusting Flash Settings
buzzer is turned on, will be shown on the LCD display.
The trigger set can wirelessly adjust the following settings: the
3. AF-Assist Beam Switch (
LAMP
)
flash power ratio, the on-or-off of the buzzer and the AF-assist
Press the switch to turn the AF-assist beam on or off. When
beam, as well as the power-ratio display mode.
the beam is turned on, will be shown on the LCD
1. On the transmitter and the receiver, set the Channel Select
display.
Switch to the same position and the Power-Control Group
4. <
-
><
+
> Button
Select Dial to the same grade.
Press the <
-
> or <
+
> button to decrease or increase the
2. Insert the receiver into the Wireless Control Port of the flash
unit. Then power the flash on.
3. Adjust the flash settings on your transmitter.
■
Wireless Triggering
1. On the transmitter and the receiver, set the Channel Select
Switch to the same position.
2. Insert the receiver into the Wireless Control Port of the flash
unit. Then power the flash on.
3. Press the Test Button to fire a flash. Alternatively, you can
set the transmitter onto the camera's hot shoe and press the
camera's shutter-release button to fire a flash.
Technical Data
3V (2*AA Ni-MH or alkaline batteries )
5V (powered by flashes)
433MHz wireless remote system
300ft (open areas)
Flash power ratio
AF-assist beam on/off
Buzzer on/off
Power-ratio display mode
Flash triggering
1/250 second
16
85g for the set
20g for the receiver
97.6*49.9*36.95mm
57*30*26.5mm
Transmitter Power Supply
Receiver Power Supply
Transmit Frequency
Workable Distance
Control on Flashes
Max. Sync. Speed
Channel
Net Weight
Transmitter Dimension (L x W x H)
Receiver Dimension (L x W x H)
