4
2. Installation
The internal GPS antenna should have a clear line of sight for best
performance. The GPS antenna is positioned under the diamond shaped
cut-outs on the top of the C100.
2.1 Dash mounting
Position the C100 on the anti-slip dash mat to prevent the unit from sliding
around the dash.
2.1 Windscreen mounting
The rubber suckers should be securely clipped into each of the three
keyhole shaped cut outs on the metal bracket before being stuck to the
windscreen. The C100 then slides onto the metal bracket and clicks in
to position. Simply depress the locking lever to slide the C100 off the
windscreen bracket.
The power cord should be plugged into the cigar lighter socket for power.
Any excess cable can easily be hidden underneath the glove box. Care
should be taken to ensure that the power cord does not interfere with the
correct operation of any airbag or other vehicle control or system. If you
intend to swap your C100 between vehicles we recommend fi tting an extra
power cord in the second vehicle.
There is an on/off switch on the cigar socket plug for your convenience.
Some vehicles are fi tted with Athermic windscreens (heat refl ective glass)
which can prevent GPS devices from working properly. If you experience
poor GPS reception you can purchase an extension GPS antenna with
an extra long cable which can receive GPS signals through the rear
windscreen, or externally. These are available from www.speedcheetah.
com or your local dealer.
Содержание C100
Страница 1: ...Speed Camera Detector ...
