Adding and Configuring the G1104-8-6T Gateway
If this CheckVideo device will be monitored by a central station, please contact the central station for a username and
password on their existing CheckVideo account. The central station will add the device to their account.
The following items can be found within the box:
•
G1104-8 channel Gateway
•
Gateway power supply
•
Terminal blocks for digital I/O
Items not included:
•
CheckVideo IP Camera Validation tool (found at
www.checkvideo.com/support)
•
A display monitor with HDMI cable
•
Mouse for local display
The Gateway has connectors on both sides. The primary connectors are found on the back panel.
To install the Gateway, make the following connections to the Gateway:
•
Ethernet cable to the router.
Note: Do not connect the CV4IP to a POE port on a router/switch. Power is
provided by the included power supply. Providing power via a POE port to the WAN connection on the device
will damage the Gateway.
•
HDMI supported monitor to Gateway
•
Provided power supply to power outlet
If you plan to use a local monitor, make sure that it is plugged in to the Gateway before it is powered up. With the
monitor connected, the Gateway
will display the “awaiting configuration from portal” message.
You will see this image
on the screen until the device is added to the CheckVideo portal.
