CheckSum G-50 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 70

CheckSum G-50 Скачать руководство пользователя страница 5

Limited Warranty

CheckSum LLC products, exclusive of fixturing products, are covered by a one-year
limited parts and labor warranty for defects in materials and workmanship from time of
original product shipment. Fixturing products (Model TR -3 series and Model G S-850) in-
clude a 90-day limited warranty. This warranty extends only to the original purchaser and
excludes products or parts that have been subject to misuse, neglect, accident, or abnor-
mal conditions of operations.

CheckSum LLC reserves the right to replace the product in lieu of repair. If the failure
has been caused, as determined by CheckSum, to be due to misuse, neglect, accident, or
abnormal conditions of operation, repairs will be invoiced at a nominal cost. In such case,
an estimate will be submitted before the work is started, if requested.

THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EX-
PRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WAR-
RANTY OF MERCHANTABILITY, FITNESS, OR ADEQUACY FOR ANY PAR-
TICULAR PURPOSE OR USE. CHECKSUM LLC SHALL NOT BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN
CONTRACT, TORT, OR OTHERWISE.

In the event of a failure of a product during the warranty period:

1.

Contact CheckSum for a returned material authorization number (RMA).

2.

Pack the product in its original packing material or suitable equivalent and return it
postage-paid to CheckSum LLC. Mark the package clearly with the RMA number.

3.

CheckSum will repair the product and return it postage-paid. R epairs are typically com-
pleted within two working days of receipt.

CheckSum Model G-50 Manual - Page 3

«
...
3
4
5
6
7
...
»

Содержание G-50







































































Отзывы:

Нет отзывов