Checkline SLW, Руководство пользователя

Страница: 19 / 44

Page 19
5. The measuring process
5.1 Taking a measurement
To do so: Let your device adjust to the surrounding tem-
perature before the measurement.
• Hold the device in one hand and insert the measur-
ing/electrode tips into the material (figure 19 ) or
press the surface electrode onto the material to be
measured (figure
20 ).
»
Make sure that the sample is not damaged by the
measuring/electrode tips..
»
Do not drop the device!
• The device will now instantly display the moisture
content on the display (figure 21 ).
»
The displayed value flashes when the moisture
content exceeds the measuring range of the
selected product type (figure
22 ). A flashing value
signals the end of the measuring range. The meas-
uring range is dependent on the product type (see
"6. Product types" ).
» Once the reading has been taken, it can be saved
on the device (see
"5.3 Saving individual readings"
or "5.4 Saving several readings (a measurement
series) at the same time" ).
WARNING
Risk of injury
Risk of injury due to the Mess-/Elektrodenspitzen
►
Keep the Mess-/Elektroden tips away from your body throughout all activi-
ties.
►
Keep the Mess-/Elektroden tips away from other people throughout all
activities.
i
Information - Measuring accuracy
This rapid and non-destructive measuring procedure allows you to take
moisture readings at a number of different points. When saving the individual
readings, the device will automatically calculate the readings’ average (see
"5.4
Saving several readings (a measurement series) at the same time" ).
19
20
21
22