Page 21
5.3
Saving individual readings
The device can be configured in such a way that the device will save a reading every
time a button is pressed. This option (manual saving function) is the device’s default
setting.
5.3.1 Activating the manual saving function in the options menu
To do so:
The device has to be switched on and be in the product selection menu.
1. Press
twice or hold for 2 seconds.
2. Select
Options
. To do so, press
or
and con-
firm by pressing
.
3. Select
Log Time
(figure
). To do so, press
or
and confirm by pressing
.
4. Select
Manual
(figure
). To do so, press
or
and confirm by pressing
.
»
The setting has been saved.
5. Press
to leave the
Options
menu.
6. Press
to leave the main menu.
5.3.2 Using the manual saving option
To do so:
The device has to be in the Data Log menu (see
). The device is set to Data
Log time - Manual.
1. Press
.
»
The display will now appear as shown in figure
and the disc symbol will be preceded by the digit
one.
2. Press
to enter a name for the saved reading
and to finish the measuring process.
»
The display will now appear as shown in figure
.
26
27
28
29
30
