TE250XN
Rack Mounting for Check Point Appliances | 15
TE250XN
General Requirements for Racks
Check Point appliances are designed for a standard 19-inch (48.26 cm) rack (see specification EIA-310-D).
The telescopic rails are designed for racks with these specifications:
Minimum Depth
Maximum Depth
22 inches (55.9 cm)
32 inches (81.3 cm)
24 inches (61 cm)
36 inches (91.4 cm)
Front and rear rack doors must have equally distributed holes on at least 65% of the surface area to give
sufficient airflow. Make sure that the racks have sufficient clearance to service the Check Point appliances
that are mounted on telescopic rails.
The telescopic rails can be used with racks that have round holes or square holes.
Rack
Side
Clearance Requirement
Front
36 in (91.4 cm) plus additional clearance, if necessary, for the mechanical lift used to move
the appliance and rails equipment.
Rear
16 in (40.6 cm) from the rear of the rack or appliance without the rear cabinet door.
22 in (55.9 cm) from the rear of the rack or appliance with the rear cabinet door.
These are the physical specifications of the appliance:
Appliance
Width
Depth
Height
U
TE250XN
17.24 in
(43.80 cm)
22.83 in
(58.00 cm)
1.73 in
(4.4 cm)
1U
