QLS250, QLS450, QLS650, and QLS800
Rack Mounting for Check Point Appliances | 12
Installing the Appliance in the Rack
Install the appliance in the telescopic rails in the rack.
Important - To prevent injury or damage, at least two people are required to install the
appliance in a rack.
Important - Do not attempt to lift, drag, or otherwise move the appliance using the
handles on the power supply units.
Important - Do not attempt to lift, drag, or otherwise move the appliance using the
handles on the power supply units.
1. Align the appliance rails to be level with the rack rails.
2. Move the appliance into the rack as far as it can go.
3. Slide the appliance in and out of the rack several times to allow the rails to position properly.
Tighten all of the rail mounting screws.
4. For each ear mount, use a rack mount screw to secure it to the rack and make sure that the appliance
cannot move. This disables the telescopic rails.
Use the rack post mounting hole that is between the rack rail screws (see item 3 in the next figure).
Item
Description
1
Extraction handle
2
Rack rail screws
3
Rack post mounting hole for rack mount screw
Legend
