CHD TR2-KBD, Руководство пользователя и инструкция по установке, Страница: 3 / 12

TR2-KBD
MIDI Interface for Korg Trident Keyboard
Model 8-436 ver. 1.0
Copyright © 2018 CHD Elektroservis.
All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
3
1 11 1 INTR INTR INTR INTRODUCTION ODUCTION ODUCTION ODUCTION
Korg Trident / Trident Mk II Keyboard MIDI Interface enables the integration of MIDI in your Trident instrument.
The instrument's keyboard can be controlled with this MIDI interface in parallel manner. The interface only
receives MIDI data so it has MIDI input only.
1.1 1.1 1.1 1.1 MIDI INTERFACE KIT PARTS MIDI INTERFACE KIT PARTS MIDI INTERFACE KIT PARTS MIDI INTERFACE KIT PARTS
Pic. 1
Pic. 1 Pic. 1
Pic. 1 –
––
– Parts of MIDI interface
Parts of MIDI interface Parts of MIDI interface
Parts of MIDI interface kit
kit kit
kit
The supplied MIDI interface kit contains all necessary parts,
materials, and detailed installation instructions. The kit contents:
1. MIDI interface board with self-adhesive supports
2. MIDI connector with bunched cables and screws, nuts and
washers
3. 14-wire flat cable with connector
4. Owner’s and Installation manuals in PDF form
1.2 1.2 1.2 1.2 GENERAL INFORMATION GENERAL INFORMATION GENERAL INFORMATION GENERAL INFORMATION
The installation of all interface components is very easy. If you follow the instruction from this manual there will
be no major problems during the installation procedure. The cover of the instrument will not be markedly
damaged during the installation. The physical appearance of the vintage instrument remains nearly the same as
before the installation. If necessary, the interface can be removed and the instrument restored back to original
appearance. All original features of the Korg Trident (Mk II) are kept. The instrument can be used the same way
as before the retrofitting.
The following tools are necessary for the installation: Phillips screwdriver, driller, drills 3,2 and 16 mm, smaller
rasp, pliers, soldering iron (a low heat iron and soldering paste).
Attention ! Attention ! Attention ! Attention ! Disconnect the instrument form the mains prior to the installation. Otherwise, there is a
risk of the electric shock!
Attention! Attention! Attention! Attention! Observe precautions for handling electrostatic discharge sensitive devices!
Attention! Attention! Attention! Attention! The producer is not responsible for any eventual mechanical or electrical damage of the
instrument caused by the infringement of the described installation procedure or by careless
manipulation during the installation of the MIDI interface!