CHD Elektroservis VS-MIDI 8-434, Руководство по установке

Страница: 5 / 16

Vermona Synthesizer MIDI Interface Vermona Synthesizer MIDI Interface Vermona Synthesizer MIDI Interface Vermona Synthesizer MIDI Interface
VS VS VS VS----MIDI MIDI MIDI MIDI Installation Installation Installation Installation Manual Manual Manual Manual
8 88 8----434 / 434 / 434 / 434 / v. 2.00 v. 2.00 v. 2.00 v. 2.00
Copyright © 2022 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
5
55
5
2 22 2 INSTALL INSTALL INSTALL INSTALLATION PROCEDURE ATION PROCEDURE ATION PROCEDURE ATION PROCEDURE
2.1 2.1 2.1 2.1 THE INSTRUMENT DISASSEMBLY THE INSTRUMENT DISASSEMBLY THE INSTRUMENT DISASSEMBLY THE INSTRUMENT DISASSEMBLY
a) Unscrew the two screws on the top cover of the instrument (fig. 2.1.1). Keep the screws and washers. They
will be used again after the MIDI kit installation is finished.
Fig. 2.1.1 Fig. 2.1.1 Fig. 2.1.1 Fig. 2.1.1 Fig. 2.1.2 Fig. 2.1.2 Fig. 2.1.2 Fig. 2.1.2
b) Carefully lift up the instrument’s top cover and turn it back (fig. 2.1.2). All instrument’s parts and boards
needed for the interface installation are now accessible (fig. 2.1.3).
Fig. 2.1.3 Fig. 2.1.3 Fig. 2.1.3 Fig. 2.1.3
VCO VCA
POWER
SUPPLY
SWITCH
+ LED
VCF
EG
INTERFACE
2.2
2.2 2.2
2.2 MIDI DIN SOCKETS INSTALLATION
MIDI DIN SOCKETS INSTALLATION MIDI DIN SOCKETS INSTALLATION
MIDI DIN SOCKETS INSTALLATION
The interface has both MIDI input and output. However, only MIDI input is necessary for basic operation of the
interface (i.e controlling the instrument by MIDI commands). The MIDI THRU/OUT output socket need not to be
installed (see chapter 3.1) if you don’t require transfer of MIDI data to another MIDI devices (THRU function) or
reverse communication of the interface with MIDI host system (OUT function). Nevertheless, having both MIDI
input and output is more convenient for an easy integration in a more advanced MIDI system.
There are more possible ways to install the MIDI socket(s) if you do not want to mechanically damage the
panels of the instrument by drilling (see chapter 3.1).
Recommended method of the MIDI sockets montage is described below.
2.2.1
2.2.1 2.2.1 2.2.1 HOLES FOR MIDI SOCKETS DRILLING HOLES FOR MIDI SOCKETS DRILLING HOLES FOR MIDI SOCKETS DRILLING HOLES FOR MIDI SOCKETS DRILLING
a) The best solution is to mount the MIDI sockets to right side on the rear panel of the instrument.