APACHE 3 User Guide (Network Bridge Version)
| 2021-02
P a g e
| 33
2. Handle the depth data
Double click a depth file in the depth file list.
Figure 4-6 Depth sampling interface
As the figure 4-6 shows, the green line on the top of main interface shows the
elevation of surface of water and fixed state (yellow represent floating and red
represent a single point), the main interface can be changed by adjusting the [Depth
H]and [Width]. the green line displayed on the bottom interface shows depth, the
red line is simulative echo signal. If these two match well, the depth can be trust and
accurate. If not, just select the wrong depth points, then click[Eraser] to delete the
points. It is suggested that the dep files should be handled in turns.
3. Select a proper[Interval]
Choose a interval for exporting the data. Select a value in the [interval] setting,
then click [2.Interval]
