Configuring Through a Web Browser
45
mainly as follows:
➢
File Name
: The name of this logging session.
➢
Sample Interval
: Select the observable rate from the dropdown list.
➢
Store Location
: Determine whether to store at internal storage or external
storage.
➢
Enable Start Time
: Set the start time of data logging in UTC. Select
Or not
option below to determine whether to start data logging from the start time
defined, or immediately after this session is switched on.
➢
Duration Time
: Set the duration of data logging.
➢
Assigned Storage
: Set the storage space of this session.
➢
Circulating Memory
: Select
Yes
or
No
option to determine whether to auto
delete old files if the storage space is full.
➢
Data Format
: Set the data format of the logged data.
➢
FTP Push
: Decide whether to push the stored files to the FTP server of your
choice.
Tap
button to save the settings and back to the
Log Settings
screen. Also,
users can click
to abandon the changed settings and back to
Log Settings
screen.
Note
– To modify data logging parameters, make sure the data logging session is
switched off.
To switch on or off
ANY
data logging session, tap the
ON
or
OFF
button to the right of
the required session.
To delete the recorded files of
ANY
data logging session, tap the
Clear
button to the
right of the required session.
To delete the recorded files of
ALL
data logging sessions, tap the
Clear ALL Accounts
button.
5.4.2
FTP Push Settings Submenu
Use this screen to configure the receiver to push stored files to the FTP server of your
choice. Only files that are configured to use FTP push are transmitted.
