CHC X91GNSS, Руководство по началу работы, Страница: 25 / 30

Start Surveying Work
22
Radio antenna : This socket is for fixing CHC made antenna on the
Radio.
Battery : This socket is for using CHC made power cable to link
the Radio to the Car battery (insuring the red point match the red
point).
Data : This socket is for using CHC made data cable to link the Radio
to the receiver.
WARING : There is sequence for the cables linking to DL3: firs please
fix the radio antenna, and then power cable, and last the data cable.
3. Control panel
Power Button : When you press this button, the front page will show
on the screen
LED : This LED will flash once per second when the radio successfully
sends out the correction data.
Screen : The system information and setting information of the
datalink would be showed inn the LED screen.
Up Button : when you press this button, the cursor on the screen will
move up
Down Button : when you press this button, the cursor on the screen
will move down.
Enter Button : when you press this button, it will make the
configuration work.
Power
Screen
Up Enter
Down
LED
Figure5.2.2-3