CHC X900+ Скачать руководство пользователя страница 5

Страница: 5 / 53

iGage

X9x User Manual

page 5 of 53

Click on the ‘Videos’ link on the right side of the page.

ADL Vantage Pro UHF Radio Manual

Your CHC receiver package may contain a high powered Pacific Crest ADL Vantage Pro radio or
repeater.

The manual for Pacific Crest ADL Vantage Pro radios can be found online:

http://www.pacificcrest.com/library/User_Guide_ADL_VantagePro.pdf

This manual contains extensive warnings and operation information.

LT30 Data Collector

You can download the CHC Factory Getting Started Guide from

www.x9gps.com

On the LT30 linked page.

Please note that iGage preloads ALL software, activates SurvCE and your LT30 will be ready to use, out of the box.

Please don’t reload the software, it should already be loaded.

Important things to remember:



Set the data collector to turn off the

backlight

after 30-seconds of inactivity.



Set the data collector to NEVER shutdown, it disrupts the Bluetooth connection.



Store jobs on the SD Card, they will be easier to transfer and there is unlimited space available.



Tapping the ON/OFF key puts the data collector in Standby



Push and hold the ON/OFF key for two seconds to turn the data collector OFF

Be careful when charging the LT30 in your vehicle. It is possible to snap the USB mini connector if you sit on the data collector with
the charging cable connected.

A software patch has been installed on your LT30 which allows the “F2” key to be used as an enter key, this allows for single button
shots in SurvCE.

Содержание X900+






















































Результаты поиска

Содержание X900+

Отзывы:

CHC X900+, Руководство пользователя, Страница: 5 / 53

Результаты поиска

Содержание X900+

Отзывы: