PEL 52
POWER & ENERGY LOGGER
90 ... 690 V
50 ... 60 Hz
Before first use, first fully charge the battery at a temperature between
0 and 40°C.
Connect the C8 / banana adapter between the V1 and N terminals
Plug the power cord into the adapter and mains power.
The device turns on.
The
symbol indicates the battery state of charge.
It takes about 5 hours to charge a discharged battery.
Press the SD card that is in the device then remove it.
Do not remove the SD card if there is a recording in progress.
Check that the new SD card is not locked.
It is preferable to format the SD card in the device using PEL Transfer software, otherwise format it using a PC.
Insert the new card and press it in all the way.
Replace the elastomeric protective cap.
The PEL must not be used when the SD card slot is open.
CHARGING THE BATTERY
SD CARD
The PEL accepts SD, SDHC and SDXC cards formatted FAT32, up to 32 GB capacity.
The PEL is delivered with a formatted SD card. If you want to install a new SD card:
Unlock the elastomeric cap marked
by turning the screw a quarter turn.
