Chauvin Arnoux C.A 6115N, Руководство пользователя

Страница: 40 / 56

40
6. RS232 INTERFACE / MEMORY
This instrument is equipped with an RS232 serial interface (SUB-D 9 poles) and memory capable of
storing approximately 800 groups of values (a measu secondary measurements + context :
voltage, current, frequency, date, time ….). The instrument has a real time clock for the date and time.
The interface enables measured or saved values to be printed out or transferred to a computer with the
C.A. 6115 UTILITY software (optional).
Furthermore, the instrument can be controlled remotely via the RS-232.
Thanks to internal insulation, the instrument can also be used to carry out measurements at the same
time.
Interface : RS232, 9 poles, galvanic separation, for printing or transferring measured or saved values
and to enable remote control (REMOTE). Direct protocol printing (summary table) on a
parallel A4 printer is possible, as is the printing out on a serial printer of measurement
‘slips’.
Time : Non-volatile, self-powered clock, for date and time.
Memory : Memory capable of containing up to 800 groups of values,
Group of values = all the values measured per function,
6.1 Technical specification of the RS232
Test voltage: 4 kV
Data format: 1 start bit, 8 data bits, 1 stop bit, without parity
Protocol Xon/Xoff handshake
Baud rate: 300 bauds … 9.6 kbaud , can be adjusted in “SET UP”.
The “- P -” display enables the remote control probe to be used. The “- - - -” display makes it possible to
print out on a parallel printer via the optional adapter.
NOTE: Select the Baud Rate of 9600 Bd in the CA6115 when transferring data from the instrument into
the PC with the Utility Software
Voltage supply: Via the interface
Connection to the serial printer
Female 9-pin connector to CA 6115N
male 9 pin connector to
to serial printer
2
2
3
3
5 5
front view front view