Chauvet Well Quad-M, Руководство пользователя, Страница: 13 / 33

Setup
WELL™ Quad-M User Manual -9-
DMX Linking
You can link the WELL™ Quad-M to a DMX controller using a standard DMX serial
connection or via W-DMX™. If using other DMX compatible products with the
WELL™ Quad-M, you can control each individually with a single DMX controller.
DMX Modes
The WELL™ Quad-M uses the standard DMX data connection for its TOUR, TR16,
ARC.1, AR1.D, ARC.2, AR2.D, AR2.S and HSV DMX modes.
•
Refer to the Introduction section for a brief description of these modes.
•
Refer to the Operation section to learn how to configure the WELL™ Quad-M to work
in these modes.
•
The DMX Values section provides you with detailed information regarding the DMX
modes.
Master/Slave
Connectivity
The Master/Slave mode allows a WELL™ Quad-M (master product) to control one or
more products (slave products) without a DMX controller.
One WELL™ Quad-M becomes the master product either when running in static (STAT)
mode or when using the automatic (AT) or customizable (PR) programs.
In addition, you must configure each of the slave products (via control panel) to operate
in Slave (SLAV) mode. During Master/Slave operation, the slave products will operate in
unison with the master product.
For more information, see the
Menu Map section.
Do not connect a DMX controller to products operating in Master/Slave mode. The
DMX controller signals may interfere with the signals from the master product.
•
The Operation section of this manual provides detailed instructions on how to
configure the Master and Slave products.
•
If you need more information about DMX standards, Master/Slave connectivity,
or the DMX cables needed in order to link the product to a DMX controller, you
can download the DMX Primer from the CHAUVET® website:
www.chauvetpro.com .
•
Verify the DIMX and CURV settings are set to OFF for optimal control of the
TR16 personality. For more information, see the
Menu Map section.