Chauvet Thruster, Руководство пользователя

Страница: 14 / 18

Operating Instructions
Thruster User Manual 14 2006-10-10
/
13:31
Controlling Multiple Thrusters™ as “One Device”
This configuration is identical to the Master-Slave setup with one exception. You use a DMX
controller and connect to the DMX Input of the Master unit.
M a s t e r f i x t u r e s e t u p
•
Assign the UNIT ASSIGN DIP-switches with the total number of Thrusters™ that will be used.
•
Set DMX ADD ASSIGN DIP-switch # 10 to the ON position.
•
Set a DMX starting address by assigning DMX ADD ASSIGN DIP-switches 1 ~ 9.
S l a ve f i x t u r e s e t u p
•
Set DMX ADD ASSIGN DIP-switch # 10 to the OFF position.
•
Assign the fixture number using DMX ADD ASSIGN DIP-switches 1 ~ 5
Setting the DMX address
Each fixture requires a "start address" from 1 to 511. A fixture requiring one or more channels for
control begins to read the data on the channel indicated by the start address. For example, a fixture
that occupies or uses 7 channels of DMX and was addressed to start on DMX channel 100, would
read data from channels: 100, 101, 102, 103, 104, 105 and 106. Choose start addresses so that the
channels used do not overlap and notate the start address selected for future reference. If this is
your first time, read the DMX Primer in the Appendix Section.
DMX Input
1 2 3 4 5 6 7 8 9 10
1 2 4 8 16
1 2 4 8
16 32 64
128 256
UNIT ASSIGN
DMX ADD
ASSIGN
Sound
Auto
DIP-switches # 1 ~ 9 are used to set the DMX starting address.
DIPswitch # 10 must be set to ON
Use certified DMX XLR cable
DMX Input
1 2 3 4 5 6 7 8 9 10
1 2 4 8 16
1 2 4 8
16 32 64
128 256
UNIT ASSIGN
DMX ADD
ASSIGN
Sound
Auto
1 2 3 4 5 6 7 8 9 10
1 2 4 8 16
1 2 4 8
16 32 64
128 256
UNIT ASSIGN
DIP-switches 1 ~ 5 are used to set the total
number of fixtures in the system. DIPswitch
# 6 sets Sound or Auto
In Slave fixtures, DIP-switches # 1 ~ 5 are used to set the
Fixture number. Remember that the master fixture’s default
address is # 1 so you will need to start at # 2. DIP # 10 will
need to be switched OFF.
LINK Out
DMX Output
DMX Input
DMX ADD
ASSIGN
Fixture # 2
Fixture # 3