Operation
-10-
STRIKE 4 User Manual Rev. 1
Static Operation
The Static mode allows the user to set the intensity and the strobe frequency from the
control panel without a DMX controller.
1. Go to the
Static
main level.
2. Select
Dimmer
.
3. Choose desired intensity (
000–255
).
4. Select
Strobe
.
5. Select the desired strobe frequency (
000–255
).
Auto Programs
Auto programs allow for control of pre-programmed strobe looks without a DMX controller.
1. Go to the
Auto Show
main level.
2. Select the desired auto program (
Auto 0–6
).
3. Select
Speed
.
4. Choose the desired speed value (
000–100
).
You cannot edit any of the auto programs (Auto 0–6).
Auto Test
This option allows you to test all the LEDs on the STRIKE 4.
1. Go to
Information
main level.
2. Select
Auto > Test
.
Master/Slave
The Master/Slave mode allows a group of STRIKE 4s (the slaves) to simultaneously
duplicate the output of another STRIKE 4 (the master) without a DMX controller.
1. Set each of the slaves:
a. Go to the
Master/Slave Mode
main level.
b. Select
Slave
.
2. Set the master product:
a. Go to the
Master/Slave Mode
main level.
b. Select
Master
.
c. Select an Auto program as explained in
Auto Programs
or Static program as
explained in
Static Operation
.
•
The master is the one that runs a program whether in Auto Show or Static
mode.
•
Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master
product.
•
The master should be the first product in the daisy chain.
Software
Information
This option shows what version of software the STRIKE 4 is running.
1. Go to the
Information
main level.
2. Select
Version
and the version number will show on the screen.
Temperature
This option shows the internal temperature of each of the STRIKE 4’s individual pods.
1. Go to the
Temperature
main level.
2. Select
LED 1–4
Backlight
This setting allows you to set the amount of time the backlight on the STRIKE 4 stays on
after the last button is pressed on the control panel.
1. Go to the
Back Light
main level.
2. Select
On
(remains on),
10 S
(10 seconds),
20 S
(20 seconds), or
30 S
(30 seconds).
3. Press <
ENTER
>.
Содержание Strike 4
Страница 1: ...User Manual ...
