Mounting
ORIENTATION
This fixture may be mounted in any position provided there is adequate room for ventilation.
RIGGING
Hanging Clamp
(sold separately)
It is important to never obstruct the fan or vents’ pathway. Mount the fixture using a
suitable “C” or “O” type clamp. Adjust the angle of the fixture by loosening both knobs
and tilting the fixture. After finding the desired position, retighten both knobs.
x
When selecting the installation location, take into consideration lamp replacement
access and routine maintenance.
x
Safety cables should always be used.
x
Never mount in places where the fixture will be exposed to rain, high humidity,
extreme temperature changes or restricted ventilation.
Fuse Replacement
1)
Disconnect the power cord.
2)
With a flat head screwdriver, wedge the fuse
holder out of its housing.
3)
Remove the damaged fuse from its holder and
replace with the exact same type of fuse.
Note: a spare fuse is included with this fixture in
the fuse compartment.
4)
Insert the fuse holder back in its place.
5)
Reconnect the power cord.
Stepper User Manual
7
2006-12-12/09:53
