SlimPAR™ Tri IRC series User Manual (Rev. 5)
Page 11 of 18
Mounting
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
Orientation
The SlimPAR™ Tri IRC series may be mounted in any position; however, make sure
adequate ventilation is provided around each product.
Rigging
•
Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and programming purposes.
•
Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight (see the
Technical Specifications
).
•
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity.
•
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
•
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
•
The double-bracketed yoke/mounting brackets/rubber feet/metallic feet also serve
as floor supports/allow for surface mounting. When mounting the product on the
floor, make sure that the product and cables are away from people and vehicles.
Mounting Diagram
(SlimPAR™ Tri 12 IRC
shown)
Gel Frame Holder
Bracket
Adjustment Knob
Mounting Bracket
Gel Frame
