Scorpion™ BLU User Manual (Rev. 6)
Page 15 of 21
Sound Mode
To enable the Sound mode, do the following:
1. Press
<MENU>
repeatedly until the active option of the Auto/Sound branch
(
AFn
to
rdn
) appears on the display.
2. Use
<UP>
or
<DOWN>
to select a sound triggered program (
Son
).
3. Press
<ENT>
(the new sound program will show solid on the display).
4. Turn the music on.
5. Press
<MENU>
repeatedly until the active option of the Sound Sensitivity
branch (
S 0
to
S 9
) shows blinking on the display.
6. Use
<UP>
or
<DOWN>
to select the sensitivity level (
S 0~S 9
).
7. Press
<ENT>
(the new sound sensitivity will show solid on the display).
The product only responds to the low frequencies of music (bass and drums).
Automatic Mode
To enable the Automatic mode, follow the instructions below:
1. Press
<MENU>
repeatedly until the active option of the Auto/Sound branch
(
AFn
to
rdn
) shows blinking on the display.
2. Use
<UP>
or
<DOWN>
to select an automatic program (
AF1
~
ASn
).
3. Press
<ENT>
(the new auto program will show solid on the display).
Laser Sky Color Mode
To enable the Laser Sky Color mode, follow the instructions below:
1. Press
<MENU>
repeatedly until the active option of the Laser Sky Color
branch (
LSE
to
LSS
) shows blinking on the display.
2. Use
<UP>
or
<DOWN>
to select a laser sky color option (
LSE
~
LSS
).
3. Press
<ENT>
(the new laser sky color will show solid on the display).
Laser Sky Effect Mode
To enable the Laser Sky Effect mode, follow the instructions below:
1. Press
<MENU>
repeatedly until
LSU
shows blinking on the display.
2. Use
<UP>
or
<DOWN>
to change the angle of the laser sky effect.
3. Press
<ENT>
(
LSU
will show solid on the display).
Reverse Motion
To reverse the direction of the pan and tilt motion, follow the instructions below:
1. Press
<MENU>
repeatedly until
rEv
shows blinking on the display.
2. Press
<ENT>
(the current option for pan direction will show (
P-n
or
P-Y
).
a. To change the setting, use
<UP>
or
<DOWN>
and continue to step “3”.
b. To keep the setting, continue to step “3”.
3. Press
<ENT>
(the current option for tilt direction will show (
t-n
or
t-Y
).
a. To change the setting, use
<UP>
or
<DOWN>
and continue to step “4”.
b. To keep the setting, continue to step “4”.
4. Press
<ENT>
(the current software version will show briefly on the display,
followed by
rEv
).
