Page 14 of 49
Rogue R3 Wash User Manual Rev. 1
O
PERATION
Pan Angle
This option assigns pan range.
1.
Highlight
Pan Angle
, press
<ENTER>
.
2.
Select
540
,
360
, or
180
, press
<ENTER>
.
Tilt Angle
This option assigns tilt range.
1.
Highlight
Tilt Angle
, press
<ENTER>
.
2.
Select
90
,
180
, or
230
, press
<ENTER>
.
X/Y Mode
This option assigns tilt range.
1.
Highlight
Fast
or
Slow
press
<ENTER>
.
2.
Select
90
,
180
, or
230
, press
<ENTER>
.
Fans
This option allows you to choose a fan mode.
AUTO
mode controls the fan speed based on the
temperature of the LED’s. In
ECO
mode, fans will stay as quiet as possible and allow the output of the
LEDs to decrease by about 20% over time depending on the ambient temperature. As the ambient
temperature increases, the output of the LEDs will decrease. In
Full
mode, the fans are on all the time at
the highest speed.
1.
Highlight
Fans
, press
<ENTER>
.
2.
Select
Auto
,
ECO
, or
Full
, press
<ENTER>
.
Display
Determines whether or not the backlight of the display will stay on after last command button pressed.
1.
Highlight
Display
, press
<ENTER>
.
2.
Select
OFF
or
ON
, press
<ENTER>
.
Screen Reverse
To invert the control panel screen:
1.
Highlight
Screen Rev
, press
<ENTER>
.
2.
Select
YES
or
NO
, press
<ENTER>
.
Dimmer Curve
This option allows you to choose a dimmer curve mode.
Linear
mode follows the speed of the user
controlling the fader when it is brought down to a “0” value. In
Square
mode the dimmer follows a square
dimming curve when the fader is brought to a “0” value. In
I Square
mode the dimmer follows a square
dimming curve in reverse when the fader is brought to a “0” value. In
SCurve
mode, the dimmer follows a
square dimming curve when the fader is brought to a “0” value.
1.
Highlight
Dimming Curve
, press
<ENTER>
.
2.
Select
Linear
,
Square
,
I Square
, or
SCurve
, press
<ENTER>
.
Dimmer Speed
This option sets the speed of the
Dimmer Curve
menu option.
1.
Highlight
Dimmer Speed
, press
<ENTER>
.
2.
Select
Smooth
or
Fast
, press
<ENTER>
.
Color Calibration
This programming level allows the user to set what each of the RGBW DMX channels dowhen set to a
“255” value.
•
Starting from the
Setup
screen level, select
Color calibration,
press
<ENTER>
.
Factory calibration
This option chooses to set the color temperature calibration to
Off
or
On
. When RGBW
DMX channels are at full, setting to
Off
sets the fader to Max. output on each of the
RGBW DMX Channels or to
On
which uses the factory calibrated color temperature.
•
Highlight
On
or
Off
, press
<ENTER>
.
Содержание Rogue R3 Wash
Страница 1: ...User Manual ...