Page 8 of 49
Rogue R3 Wash User Manual Rev. 1
S
ETUP
DMX Linking
You can link the Rogue R3 Wash to a DMX controller using a 3- or 5-pin DMX connection. If using other
DMX-compatible products with this product, you can control each individually with a single DMX controller.
DMX Personalities
The Rogue R3 Wash uses a 3- or 5-pin DMX data connection for the 21-, 62-, 71- and 107-channel DMX
personalities.
•
Refer to the Introduction for a brief description of each DMX personality.
•
Refer to the Operation chapter to learn how to configure the Rogue R3 Wash to work in these
personalities.
•
The DMX Values section provides detailed information regarding the DMX personalities.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The Rogue R3 Wash supports RDM protocol
that allows feedback to make changes to menu map options.
If you are not familiar with or need more information about DMX standards,
Master/Slave connectivity, or the DMX cables needed to link this product to a
DMX controller, download the DMX Primer from the Chauvet website:
www.chauvetprofessional.com
.
Содержание Rogue R3 Wash
Страница 1: ...User Manual ...