Setup
Ovation™ H-105WW User Manual Rev. 1
-7-
DMX Linking
You can link the Ovation™ H-105WW to a DMX controller using a 5-pin DMX connection. If
using other DMX-compatible products with the Ovation™ H-105WW, you can control each
individually with a single DMX controller.
DMX
Personalities
The Ovation™ H-105WW uses a 5-pin DMX data connection for the 1-, 2- and 4-channel DMX
personalities.
•
Refer to the
Introduction
chapter for a brief description of each DMX personality.
•
Refer to the
Operation
chapter to learn how to configure the Ovation™ H-105WW to work in
these personalities.
•
The
DMX Values
section provides you with detailed information regarding the DMX
personalities.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller,
download the DMX Primer from the Chauvet
website:
http://www.chauvetlighting.com/download/
.
Remote Device
Management
(RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to
communicate bi-directionally along existing DMX cabling. Check the DMX controller’s User
Manual or with the manufacturer as not all DMX controllers have this capability. The
Ovation™ H-105WW supports RDM protocol that allows feedback to make changes to
DMX Address
and
DMX Channel
menu map options as well as allowing you to monitor the
Temperature
. Please refer to
RDM On/Off
to enable/disable this function.
Master/Slave
Connectivity
The Master/Slave mode allows a Ovation™ H-105WW (the master) to control one or more
Ovation™ H-105WWs (the slaves) without a DMX controller. One Ovation™ H-105WW
becomes the master when running an auto program, or by being in a Static mode.
You must configure each slave’s control panel to operate in Slave mode. During Master/Slave
operation, the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master.
The
Operation
section of this manual provides detailed instructions on how to configure
the master and slaves.
If you are not familiar with or need more information about DMX standards, or the DMX
cables needed to link this product to a DMX controller, download the DMX Primer from
the Chauvet website:
http://www.chauvetlighting.com/download/
.
Содержание Ovation H-105WW
Страница 1: ...User Manual ...
