Page 6 of 17
Orb™ User Manual (Rev. 01a)
3.
S
ETUP
AC Power
This product has an auto-ranging power supply and it can work with an input voltage
range of 100~240 VAC, 50/60 Hz.
To determine the power requirements for a particular fixture, see the label affixed to
the back plate of the fixture or refer to the fixture’s specifications chart. A fixture’s
listed current rating indicates its average current draw under normal conditions.
Always connect this product to a protected circuit (circuit breaker or fuse),
making sure that it has an appropriate electrical ground to avoid the risk of
electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit,
even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Power Linking
This fixture provides power linking via the Edison/IEC outlet located in the back of the
unit. Please see the diagram below for further explanation.
Power Linking
Diagram
You can power link up to 27
Orb™ units on 120 VAC or up to 51 Orb™ units on
230 VAC.
The power linking diagram shown above corresponds to the North American
version of this product ONLY! If using this product in other markets, you must
consult with the local CHAUVET® distributor as power linking connectors and
requirements may differ in your country or region.
Generic Fixture Housing
1
st
Fixture
2
nd
Fixture
3
rd
Fixture
Other fixtures
Содержание ORB
Страница 1: ...User Manual ...
